Rolls Royce Phantom PIII N/S Rear spring, front shackle pin. Please check and confirm sizes with me before ordering. These are not the same throughout the car series.
Rolls Roye Phantom III 3 Clutch operating finger (loc D35)
1 × £105.00
Dynamo front bearing, 4.25L and 3 brush 20HP & 20/25 (loc H21)
1 × £22.00
Nut, temperature sender union 4 1/4l , 25/30, PIII- NOS - D75632 (Loc G73)
1 × £35.00
Bentley 3.5L Rear dynamo Bearing (Loc D26)
1 × £22.00
Gasket, Bentley Gear change casing FB series on. GB1781 (Loc E35)
1 × £6.30
Rolls Royce Phantom III ABC series water rail stud 3.250 long. (loc J83)
1 × £18.25
Rolls Royce phantom III Carburettor Accelerator pump / plunger (Loc G32)
1 × £146.10
Rolls Royce Phantom III Kingpin Lower housing (Loc H17)
1 × £220.00 Subtotal: £574.65
Rolls Roye Phantom III 3 Clutch operating finger (loc D35)
1 × £105.00
Dynamo front bearing, 4.25L and 3 brush 20HP & 20/25 (loc H21)
1 × £22.00
Nut, temperature sender union 4 1/4l , 25/30, PIII- NOS - D75632 (Loc G73)
1 × £35.00
Bentley 3.5L Rear dynamo Bearing (Loc D26)
1 × £22.00
Gasket, Bentley Gear change casing FB series on. GB1781 (Loc E35)
1 × £6.30
Rolls Royce Phantom III ABC series water rail stud 3.250 long. (loc J83)
1 × £18.25
Rolls Royce phantom III Carburettor Accelerator pump / plunger (Loc G32)
1 × £146.10
Rolls Royce Phantom III Kingpin Lower housing (Loc H17)
1 × £220.00 Subtotal: £574.65
£290.00
1 in stock
Rolls Royce Phantom PIII N/S Rear spring, front shackle pin. Please check and confirm sizes with me before ordering. These are not the same throughout the car series.